FUTURE sectional doors
Our company is known as a manufacturer of high-quality doors and fences, used both in residential construction and for securing areas and industrial facilities. One of our most popular products are Future sectional doors. They are mainly intended for heated garages, because they are filled with an additional insulating layer of polyurethane foam. Thanks to this, even at low temperatures, heat loss in the room is minimized. This significantly reduces heating bills for the entire house.
As a renowned manufacturer of garage doors, we offer our customers the possibility of choosing from three types of embossing, which can be found on the panel on the outside. These variants are aesthetic, fashionable and discreetly emphasize the high standard represented by our products from the Future line. The customer can choose a leaf without embossing, single or panel.
Colours and designs
FUTURE sectional doors are available in a dozen or so colours and structures to choose from, which allows you to match the installed model to the colour of the building's facade or garage walls. The colour palette includes a wide range of shades, and it is possible to order the door covering in colours from the RAL palette or imitating noble wood species. Finishes such as golden oak, walnut or winchester allow you to create an interesting decorative element that will also be a functional entrance to the garage. The colours and types of finishes have been selected in such a way that they perfectly match both older buildings with a classic character and modern facilities with contemporary and minimalist architecture. In addition to the standard palette, we also offer the possibility of using a different colour on individual order.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The colors presented on the LEGBUD GARGULA website should be treated as indicative only.
Panel creasing
Single creasing
Without creasings
Dimensions
The dimensions of the garage doors we offer allow them to be installed in warehouses, industrial plants and wholesalers. They also allow you to choose a model that fits even the most unusual facility. We have models with a width of 2000 mm up to 5000 mm. The height can also be adjusted to the individual needs of the customer. We provide wings in which it is from 2000 mm to 3000 mm.
Features
Protection against falling of the door casing
Protection against falling of the door casing in the event of a cable break (for gates with an area of less than 7 m2).
Glazing
The glazing is made of transparent plexiglass with a black frame. Four types of glazing are available.
Ventilation grille
Ventilation grille measuring 132 x 338 mm in the following colours: white, brown or black (inside always white).
Additional bolt
Additional bolt mounted on the right or left side of the door.
Wicket in the casing
The minimum dimensions of the door in which the wicket can be used are 2000x2200mm So x Ho, while the maximum dimensions are 3500mm x 3000mm. Due to the risk of damaging the door when trying to lift it when the wicket is open, we recommend equipping the wicket with a door closer or an opening sensor connected to the drive.
The standard threshold height for walk-in doors is 100mm. The wicket must be mounted at least 600mm from the edge of the door.
Torsion spring system mounted on the back of the guides
Option for openings with low lintel. Minimum lintel height 150 mm for manual gates and 200 mm for automatic gates.
Lock
At the customer's request, we install a lock in manually opened gates.
Automation for doors
For LEGBUD GARGULA sectional doors we recommend using automation. The set includes two two-channel remote controls, a control unit, a guide rail up to 2300 mm high with the possibility of extension.
Online catalogues
Download and view LEGBUD GARGULA product catalogues.
Download
See technical data sheets and assembly instructions for our products.
Distribution
Check where you can purchase LEGBUD GARGULA products in your area.
Contact
Our consultants will be happy to answer your questions. Contact us by phone, email or contact form.
